Individual Impact Carrier Idler ICR
The individual ICR-model Impact carrier idler is also used in the KIC-model carrier idler set.
Ask for price
Steel Chain Driven Accumulation Roller Conveyor MAC-CS/G
The MAC accumulation roller conveyor always gives optimum driving force to carried items by adjusting the spring force. The MAC-CS model, which adjusts the driving force for every several rollers , and the MAC-CN model, which adjusts the driving force for each roller, can be selected depending on the applications and use conditions. And the MAC-G model is chain driven accumulation roller conveyor for middle weight things that uses #50 single chain.
- Steel
- Chain transmission
- Medium weight model
- Standard series
Air Lift With Parallel Link ALB-TBL-WN
The Air Lift (Ballon Lifter) has a built-in type of the parallel link mechanism. The hose can be replaced without disassembling the lift. The floor is lower and the movable load is larger compared with cylinders. A proximity switch can be attached. Attached with a speed exhaust controller.
- Stroke: 30 mm
- For heavy loads
- Equipped with lowering speed adjustment function
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
Steel Chain Driven Accumulation Roller Conveyor MAC-H
Reliable MAC-H model for ultra-heavy loads that uses 150-frame and #60 single chain. Accumulation conveyor for heavy loads with maximum transport weight of 700 kg/m.
- Steel
- Chain transmission
- Heavy weight model
- Standard series
Air Lift With Parallel Link ALB-HB-N
Transfer is possible even if the pallet is bent by a high stroke during direction change (45 mm). The Air Lift (Ballon Lifter) has a built-in type of the parallel link mechanism. The floor is lower and the movable load is larger compared with cylinders. The hose can be replaced without disassembling the lift. A proximity switch can be attached. Attached with a speed exhaust controller.
- Stroke: 45 mm
- For heavy loads
- Equipped with lowering speed adjustment function
Individual Guide Idler GR
The individual GR model guide idler is also used in the KAC model self-aligning carrier idler set, the KAR model self-aligning return idler set and each of the KCG model/KRG model/KFG model guide idler sets.
Ask for price
Steel Driver Roller Conveyor M MMC-DR
Performs quiet and smooth conveyance compared with the chain drive system even in the case of high speed conveyance by the drive shaft drive system.
- Steel
- Belt transmission
- Medium weight model
- 90-frame series
- Simple Accumulation
Air Lift With Parallel Link ALB-HB-WN
Compact design with a low floor for ultra heavy loads. The Air Lift (Ballon Lifter) has a built-in type of the parallel link mechanism. It is stronger and stabler because two hoses are used. The hose can be replaced without disassembling the lift. A proximity switch can be attached. Attached with a speed exhaust controller.
- Stroke: 45 mm
- For ultra heavy loads
- Equipped with lowering speed adjustment function
Steel Driver Roller Conveyor M MMC-TC
Performs quiet and smooth conveyance compared with the chain drive system even in the case of high speed conveyance by the drive shaft drive system.
- Steel
- Belt transmission
- Medium weight model
- 90-frame series
- Simple Accumulation
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
Air Lift With Rollers ALR-PR-57W
Mounting the Air Lift (Ballon Lifter) is easy. It is stronger and stabler because two hoses are used. One lift is sufficient for small items. A proximity switch can be attached.
- Stroke: 30 mm
- For medium loads