Flat Carrier Idler Set Stand-Type KFC-2

The type of the idler is bracket-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.

Ask for price

The type of the idler is bracket-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.

Ask for price

An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.

Ask for price

With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.

Ask for price