Individual Flat Impact Carrier Idler Single Part Model FICR1

The individual CR-model carrier idler is also used in the KC-model carrier idler set, KAC-model self-aligning carrier idler set and A-model hold return idler set.

Ask for price

An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.

Ask for price

An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.

Ask for price

A cleaning idler attached to the return side of a conveyor belt. The meandering of the belt must be prevented as the spirals rotate and clean any dust particles and dirt from the belt.

Ask for price