Return Idler KR
An idler required to be installed on the return side of the conveyor. It rotates while supporting the belt. Since dirt of transporting item cause pipe’s wear and damage easily on the return side, it result meandering of the belt. We recommend using the spiral return idler and belt cleaner during installation.
Description
Shipping & Delivery
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Flat Carrier Idler Set Stand-Type KFC-2
The type of the idler is stand-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Ask for price
Individual Flat Carrier Idler Single Part Model FCR1
The individual RR-model return idler can also be used with the KR-model return idler set, KFC-1-model flat carrier idler set and KAR-model self-aligning return idler set.
Ask for price
Flat Impact Carrier Idler Set Bracket-Type KFIC-1
The type of the idler is bracket-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.
Ask for price
VC-model Carrier Idler Set VC
An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.
Ask for price
Self-Aligning Return Idler KAR
An idler attached to the return side to prevent meandering. Similar to the properties of the self-aligning carrier Idler, it serves to push the belt back into place.
Ask for price
T-model Self Aligning Return Idler Set KART
With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price