V-model Hold Return Idler Set KVRP

An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.

Ask for price

An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.

Ask for price

A cleaning idler attached to the return side of a conveyor belt. The meandering of the belt must be prevented as the spirals rotate and clean any dust particles and dirt from the belt.

Ask for price

With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.

Ask for price