Rubber Sleeved Return Idler Set KGSR
An idler to be affixed to the return side. As only the rubber rings placed around the idler make contact with the belt, this serves to ensure whatever is attached to the belt is not accidentally knocked off. Please note that the number of rings differs depending on the width of the belt.
Description
Related products
Impact Carrier Idler Set KIC
Individual Impact Carrier Idler ICR
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Flat Carrier Idler Set Bracket-Type KFC-1
Individual Flat Impact Carrier Idler Two Part Model FICR2
VC-model Carrier Idler Set VC
