For more information about the product you can click here to open catalog
Belgotch Meander-less Model Type60-G1
The general-purpose model of the Belgotch (Belt Conveyor) series that uses a 60-frame with enhanced strength and have no projection to the frame side surface of the drive part.
- Aluminum frame
- Center drive
- Light weight model
Description
Shipping & Delivery
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-1-350x450.jpg)
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-2-350x450.jpg)
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Belgotch Meander-less Model Type34-G1
The Belgotch (Belt Conveyor) has a stable conveyance with less deviation realized by adopting a meander-less belt. It is suitable for places that are difficult to perform maintenance inspection such as when the conveyor is set to other machines. It also supports severe use conditions such as forward reverse operations and can be used for various purposes.
- Aluminum frame
- Center drive
- Light weight model
Belgotch Roller Edge Meander-less Model Type34-RG1
Dimension R at both ends of the conveyor is 8 mm, and the Belgotch (Belt Conveyor) model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
- Aluminum frame
- Center drive
- Light weight model
Belgotch Knife Edge Model Type34-K1
The 3-mm end R has a sharp edge, and the Belgotch (Belt Conveyor) model allows smooth transfer of small things that are about 20 mm. The standard specification has a knife edge on one side.
- Aluminum frame
- Center drive
- Light weight model
Belgotch Joint Model Type34-J1
The Belgotch (Belt Conveyor) model has a short machine length that is optimum for connecting conveyance between processes. The minimum machine length is 300 mm.
- Aluminum frame
- Center drive
- Light weight model
Belgotch Joint Model Type34-JG1
The meander-less Belgotch (Belt Conveyor) model of the joint model TYPE 34-J1. It supports severe conditions such as forward and reverse operations and installation to places where it is difficult to perform maintenance inspection.
- Aluminum frame
- Center drive
- Light weight model
Belgotch Troughed Belt Model Type34-V2
The hull-shaped belt type Belgotch (Belt Conveyor) model that can carry small things and particulate works that are likely to be spilled without fail. The upper part drive type should be used when the items to be carried contain water or oil.
- Aluminum frame
- Head drive
- Light weight model
Belgotch Meander-less Model Type90-G1
The Belgotch (Belt Conveyor) has a carrier table system, which realizes stable conveyance of unstable heavy things, is adopted.
- Aluminum frame
- Center drive
- Medium weight model
Belgotch Slope Belt Cleat Model Type60-ZD2
The Belgotch (Belt Conveyor) has a slope belt cleat model that allows inclined conveyance (with a cleat height of 30 H and a cleat pitch of about 300 P). It supports an inclination angle of up to 45°.
- Aluminum frame
- Head drive
- Light weight model