For more information about the product you can click here to open catalog
Individual Flat Carrier Idler Two Part Model FCR2
The individual RR-model return idler can also be used with the KR-model return idler set, KFC-2-model flat carrier idler set and KAR-model self-aligning return idler set.
Description
Shipping & Delivery
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
Individual Center Idler for T-model Carrier TCCR
Individual center idler for T-model carrier
Ask for price
Individual Flat Carrier Idler Single Part Model FCR1
The individual RR-model return idler can also be used with the KR-model return idler set, KFC-1-model flat carrier idler set and KAR-model self-aligning return idler set.
Ask for price
Individual Return Idler RR
The individual RR-model return idler can also be used with the KR-model return idler set, KFC-1-model flat carrier idler set and KAR-model self-aligning return idler set.
Ask for price
Spiral Return Idler Set KSR
A cleaning idler attached to the return side of a conveyor belt. The meandering of the belt must be prevented as the spirals rotate and clean any dust particles and dirt from the belt.
Ask for price
T-model Self Aligning Return Idler Set KART
With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
V-model Hold Return Idler Set KVRP
An idler attached to the return side to prevent meandering. As with the ‘A-model Hold Return Idler’, this serves to keep the belt in the center.
Ask for price