A carrier roller, also known as a conveyor roller, is a component used in conveyor belt systems to support and move the belt. It is a cylindrical tube with internal bearings or bushings that allow it to rotate freely around a shaft or axis. Carrier rollers are installed in parallel along the length of the conveyor belt bed. They reduce friction by enabling the belt to glide smoothly instead of rubbing against the frame. The spinning motion of the rollers also helps propel belt and material in the desired direction.
Carrier Idler Set KC
An idler required to be installed on the carrier side of the conveyor. Suited to the transporting of dirt, sand, gravel, ore, or stones. The troughing angle can be selected from 20°, 30°, or 45°, and also come in standard type or meandering prevention forward inclining type.
Ask for price
Return Idler KR
An idler required to be installed on the return side of the conveyor. It rotates while supporting the belt. Since dirt of transporting item cause pipe's wear and damage easily on the return side, it result meandering of the belt. We recommend using the spiral return idler and belt cleaner during installation.
Ask for price
Individual Carrier Idler CR
The individual CR-model carrier idler is also used in the KC-model carrier idler set, KAC-model self-aligning carrier idler set and A-model hold return idler set.
Ask for price
Impact Carrier Idler Set KIC
An idler installed under hopper outlet. Impact comes from crashed stone fallen from hopper outlet is softened by the grooved-type rubber idler, preventing damage oto the belt and stand. The throughing angle can be selected from 20°, 30° or 45°.
Ask for price
Individual Impact Carrier Idler ICR
The individual ICR-model Impact carrier idler is also used in the KIC-model carrier idler set.
Ask for price
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
Individual Guide Idler GR
The individual GR model guide idler is also used in the KAC model self-aligning carrier idler set, the KAR model self-aligning return idler set and each of the KCG model/KRG model/KFG model guide idler sets.
Ask for price
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
Individual T-model Carrier Idler TCR
Individual T-model carrier idler
Ask for price
Individual Center Idler for T-model Carrier TCCR
Individual center idler for T-model carrier
Ask for price
Flat Carrier Idler Set Bracket-Type KFC-1
The type of the idler is bracket-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Ask for price
Flat Carrier Idler Set Stand-Type KFC-2
The type of the idler is stand-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Ask for price