Flat Guided Idler Set KFG
Flat guide idler set
Description
Shipping & Delivery
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-1-350x450.jpg)
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-2-350x450.jpg)
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Carrier Idler Set KC
An idler required to be installed on the carrier side of the conveyor. Suited to the transporting of dirt, sand, gravel, ore, or stones. The troughing angle can be selected from 20°, 30°, or 45°, and also come in standard type or meandering prevention forward inclining type.
Ask for price
Impact Carrier Idler Set KIC
An idler installed under hopper outlet. Impact comes from crashed stone fallen from hopper outlet is softened by the grooved-type rubber idler, preventing damage oto the belt and stand. The throughing angle can be selected from 20°, 30° or 45°.
Ask for price
Individual Impact Carrier Idler ICR
The individual ICR-model Impact carrier idler is also used in the KIC-model carrier idler set.
Ask for price
Individual Flat Carrier Idler Single Part Model FCR1
The individual RR-model return idler can also be used with the KR-model return idler set, KFC-1-model flat carrier idler set and KAR-model self-aligning return idler set.
Ask for price
Flat Impact Carrier Idler Set Stand-Type KFIC-2
The type of the idler is stand-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.
Ask for price
VC-model Carrier Idler Set VC
An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.
Ask for price
T-model Self Aligning Return Idler Set KART
With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price