For more information about the product you can click here to open catalog
Spiral Return Idler Set KSR
A cleaning idler attached to the return side of a conveyor belt. The meandering of the belt must be prevented as the spirals rotate and clean any dust particles and dirt from the belt.
Description
Shipping & Delivery
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-1-350x450.jpg)
![](https://makitech.id/wp-content/uploads/2021/07/wd-ship-2-350x450.jpg)
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Carrier Idler Set KC
An idler required to be installed on the carrier side of the conveyor. Suited to the transporting of dirt, sand, gravel, ore, or stones. The troughing angle can be selected from 20°, 30°, or 45°, and also come in standard type or meandering prevention forward inclining type.
Ask for price
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
Flat Carrier Idler Set Stand-Type KFC-2
The type of the idler is stand-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Ask for price
Flat Impact Carrier Idler Set Bracket-Type KFIC-1
The type of the idler is bracket-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.
Ask for price
Individual Flat Impact Carrier Idler Two Part Model FICR2
The individual RR-model return idler can also be used with the KR-model idler set, KFC-2-model flat carrier idler set and KAR-model self-aligning return idler set.
Ask for price
Garland Carrier Idler Set KGC
The KGC model is one of the carrier idlers often used at fresh concrete plants, this a hanging type that does not use a carrier stand.
Ask for price