Flat Impact Carrier Idler Set Stand-Type KFIC-2

An idler required to be installed on the carrier side of the conveyor. Suited to the transporting of dirt, sand, gravel, ore, or stones. The troughing angle can be selected from 20°, 30°, or 45°, and also come in standard type or meandering prevention forward inclining type.

Ask for price

The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.

Ask for price

The type of the idler is stand-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.

Ask for price

An idler attached to the return side to prevent meandering. Affixed to the sides of the head and tail pulleys, the steeply inclined idler angle serves to keep the belt in the center. An idler that is particularly outstanding as a meandering prevention tool.

Ask for price