Flat Impact Carrier Idler Set Bracket-Type KFIC-1
The type of the idler is bracket-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.
Description
For more information about the product you can click here to open catalog
Shipping & Delivery
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Individual Carrier Idler CR
The individual CR-model carrier idler is also used in the KC-model carrier idler set, KAC-model self-aligning carrier idler set and A-model hold return idler set.
Ask for price
Impact Carrier Idler Set KIC
An idler installed under hopper outlet. Impact comes from crashed stone fallen from hopper outlet is softened by the grooved-type rubber idler, preventing damage oto the belt and stand. The throughing angle can be selected from 20°, 30° or 45°.
Ask for price
Individual Impact Carrier Idler ICR
The individual ICR-model Impact carrier idler is also used in the KIC-model carrier idler set.
Ask for price
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
T-model Self Aligning Carrier Idler Set KACT
The KACT model with the purpose of correcting meandering in the same way as the KAC-model self-aligning carrier idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
Flat Carrier Idler Set Bracket-Type KFC-1
The type of the idler is bracket-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Ask for price
T-model Self Aligning Return Idler Set KART
With the purpose of correcting meandering in the same way as the KAR-model self-aligning return idler set, meandering can be corrected even without a guide idler on both ends by using idlers with tapered rubber lining. In addition, the friction of the idler and belt means damage to the belt can be greatly prevented by the use of rubber lining. This is mainly used for conveyors that perform forward and reverse movement.
Ask for price
A-model Hold Return Idler Set KARP
An idler attached to the return side to prevent meandering. Affixed to the sides of the head and tail pulleys, the steeply inclined idler angle serves to keep the belt in the center. An idler that is particularly outstanding as a meandering prevention tool.
Ask for price