Flat Carrier Idler Set Stand-Type KFC-2
The type of the idler is stand-type and it required to be installed on the carrier side of the flat conveyor. Used for straight transport of bags and boxed items, etc.
Description
For more information about the product you can click here to open catalog
Shipping & Delivery
SHIPPING & DELIVERY
Our products are sent using a private delivery service for short distances and expeditions for long distances. We also ship worldwide. Please contact us and send us an inquiry for more information.
Related products
Individual Carrier Idler CR
The individual CR-model carrier idler is also used in the KC-model carrier idler set, KAC-model self-aligning carrier idler set and A-model hold return idler set.
Ask for price
Self-Aligning Carrier Idler Set KAC
An idler to be affixed to the sides of the carrier to prevent meandering. As the belt makes contact with the guide idlers on each end while the conveyor belt is in use, it serves the purpose of pushing the meandering belt back to the center. The troughing angle can be selected from 20°, 30° or 45°.
Ask for price
Flat Impact Carrier Idler Set Bracket-Type KFIC-1
The type of the idler is bracket-type. As with the impact carrier idler, any impact is softened by the grooved-type rubber idler, preventing damage to the belt and stand.
Ask for price
VC-model Carrier Idler Set VC
An idler required to be installed on the carrier side of the climber-model rigid conveyor. Different to the KC-model carrier idler in that this model is suited to the transport of lighter items. The troughing angle can be selected from 20° or 30°.
Ask for price
Garland Carrier Idler Set KGC
The KGC model is one of the carrier idlers often used at fresh concrete plants, this a hanging type that does not use a carrier stand.
Ask for price
Spiral Return Idler Set KSR
A cleaning idler attached to the return side of a conveyor belt. The meandering of the belt must be prevented as the spirals rotate and clean any dust particles and dirt from the belt.
Ask for price
