It is a wheel plated by pressing the outer ring and case from a flat plate, and is suitable for low-cost, light to medium load load rotation. Wheel outer diameter is 38, wheel width is 12 and the total height is 52.
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
W-38TS Wheel Conveyor
It is a wheel plated by pressing the outer ring and case from a flat plate, and is suitable for low-cost, light to medium load load rotation. Wheel outer diameter is 38, wheel width is 12 and the total height is 52.
Description
Make An Offer Now!
Additional information
25
Pressed
38
50, 75, 100, 150
6.5
12
Related Products
Belgotch Type 34 Short Width Model
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
Belgotch Type 34 Standard Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
Belgotch Type 34 Knife Edge Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.