This type of conductive table lifter has a 500 kg movable load, 1000 mm stroke and one stage. stable work and lifting movement are realized by the structure with less rolling motion; the operating noise that generates at the time of rising and lowering is made small by the design; the work efficiency is enhanced by the stop accuracy and the constant rising and lowering speed; the maintenance is easy compared with hydraulic type, and the work environment can be kept clean without an oil leak; no hydraulic drift occurs even if the table is kept lifted for a long time.
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
This Belgotch has an aluminum frame, center drive, and a light weight model. The general-purpose model of the Belgotch series that uses a 60-frame with enhanced strength and have no projection to the frame side surface of the drive part.
TSD1-0510 Table Lifter
This type of conductive table lifter has a 500 kg movable load, 1000 mm stroke and one stage. stable work and lifting movement are realized by the structure with less rolling motion; the operating noise that generates at the time of rising and lowering is made small by the design; the work efficiency is enhanced by the stop accuracy and the constant rising and lowering speed; the maintenance is easy compared with hydraulic type, and the work environment can be kept clean without an oil leak; no hydraulic drift occurs even if the table is kept lifted for a long time.
Description
Make An Offer Now!
Additional information
500
1
Gray
38/31
1000
Foot Switch, Lead Wire, Two-point Push Button
Related Products
Belgotch Type 34 Troughed Belt Model
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
Belgotch Type 34 Knife Edge Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
Belgotch Type 60 Meander less Model
This Belgotch has an aluminum frame, center drive, and a light weight model. The general-purpose model of the Belgotch series that uses a 60-frame with enhanced strength and have no projection to the frame side surface of the drive part.