The compact design matches anywhere. “Table lifter” that realizes not only vertical transportation but also work efficiency. Movable load 3000 kg, stroke 1250 mm, one stages, and a standard frame size. Check out the Max-TH optional parts here!
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
THD1-3012A Table Lifter
The compact design matches anywhere. “Table lifter” that realizes not only vertical transportation but also work efficiency. Movable load 3000 kg, stroke 1250 mm, one stages, and a standard frame size. Check out the Max-TH optional parts here!
Description
Make An Offer Now!
Additional information
3000
1
Gray, Major Green, Super Green
30/25, 60/50
1250
Foot Switch, Lead Wire, Two-point Push Button
Related Products
Belgotch Type 34 Short Width Model
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
Belgotch Type 34 Joint Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
Belgotch Type 34 Troughed Belt Model
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.