The compact design matches anywhere. “Table lifter” that realizes not only vertical transportation but also work efficiency. Movable load 1000 kg, stroke 845 mm, one stages, and a standard frame size. Check out the Max-TH optional parts here!
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
TH1-1008A Table Lifter
The compact design matches anywhere. “Table lifter” that realizes not only vertical transportation but also work efficiency. Movable load 1000 kg, stroke 845 mm, one stages, and a standard frame size. Check out the Max-TH optional parts here!
Description
Make An Offer Now!
Additional information
1000
1
Gray, Major Green, Super Green
24/20, 45/38
845
Foot Switch, Lead Wire, Two-point Push Button
Related Products
Belgotch Type 34 Knife Edge Model
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
Belgotch Type 34 Meander less Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
Belgotch Type 34 Troughed Belt Model
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.