This type of medium weight tapered roller conveyor. For use with inner R900 (mm), with an angel of 90 degree. Idler width (nominal) is 300W-800W in standard increments of 100mm. The smaller diameter side of the idler is 42.7.
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
The meander-less model of the joint model TYPE 34-J1. It supports severe conditions such as forward and reverse operations and installation to places where it is difficult to perform maintenance inspection.
The belt surface is troughed at the center, and this allows carrying small things and particulate works that are likely to be spilled without fail. The right and left belt support plates can easily be removed for cleaning etc.
R-TCN900 Tapered Roller Conveyor
This type of medium weight tapered roller conveyor. For use with inner R900 (mm), with an angel of 90 degree. Idler width (nominal) is 300W-800W in standard increments of 100mm. The smaller diameter side of the idler is 42.7.
Description
Make An Offer Now!
Additional information
Steel
Curve
12.2
Steel
Medium
Related Products
Belgotch Type 34 Troughed Belt Model
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
Belgotch Type 34 Joint Model
The meander-less model of the joint model TYPE 34-J1. It supports severe conditions such as forward and reverse operations and installation to places where it is difficult to perform maintenance inspection.
Belgotch Type 34 Roller Edge Meander less Model
The belt surface is troughed at the center, and this allows carrying small things and particulate works that are likely to be spilled without fail. The right and left belt support plates can easily be removed for cleaning etc.