This type of heavy weight steel roller conveyor has an idler diameter of 60.5, wall thickness is t3.8, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm, free sizes are also possible. Changed the precision-machined bearing of the previous model R-6038 to a bearing that meets standards, improving the quality of the idler, low-cost. 90 standard frame.
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
R-6038SB Steel Roller Conveyor
This type of heavy weight steel roller conveyor has an idler diameter of 60.5, wall thickness is t3.8, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm, free sizes are also possible. Changed the precision-machined bearing of the previous model R-6038 to a bearing that meets standards, improving the quality of the idler, low-cost. 90 standard frame.
Description
Make An Offer Now!
Additional information
Steel
Straight
60.5
20.0
3.8
Steel
Heavy
Related Products
Belgotch Type 34 Troughed Belt Model
The model smoothly carries things from the tilted surface to the horizontal surface without making a connection. A vertical groove belt for slopes is used as standard, and the drive part is also movable. Therefore, the conveyor can be installed to slopes or horizontal places depending on the application. The angle can also be adjusted easily based on the layout.
Belgotch Type 34 Knife Edge Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
Belgotch Type 34 Standard Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.