This type of medium weight steel roller conveyor has an idler diameter of 60.5, wall thickness is t2.3, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm. Pressed bearing, low-cost. 90 standard frame.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
This belgotch has an aluminum frame, center drive, and a medium weight model. The carrier table system, which realizes stable conveyance of unstable heavy things, is adopted.
R-6023P Steel Roller Conveyor
This type of medium weight steel roller conveyor has an idler diameter of 60.5, wall thickness is t2.3, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm. Pressed bearing, low-cost. 90 standard frame.
Description
Make An Offer Now!
Additional information
Steel
Straight
60.5
12.2
2.3
Steel
Medium
Related Products
Belgotch Type 34 Meander less Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
Belgotch Type 34 Knife Edge Model
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
Belgotch Type 90 Meander less Model
This belgotch has an aluminum frame, center drive, and a medium weight model. The carrier table system, which realizes stable conveyance of unstable heavy things, is adopted.