This type of medium weight steel roller conveyor has an idler diameter of 57.2, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm, free sizes are also available. Pressed bearing and low-cost, 90 standard frame.
This Belgotch has an aluminum frame, center drive, and a light weight model. The general-purpose model of the Belgotch series that uses a 60-frame with enhanced strength and have no projection to the frame side surface of the drive part.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
R-5714PD Steel Roller Conveyor
This type of medium weight steel roller conveyor has an idler diameter of 57.2, idler pitch is min P75. Idler width (nominal) is 100W-1000W in standard increments of 50mm, free sizes are also available. Pressed bearing and low-cost, 90 standard frame.
Description
Make An Offer Now!
Additional information
Steel
Straight
57.2
12.2
1.4
Steel
Medium
Related Products
Belgotch Type 60 Meander less Model
This Belgotch has an aluminum frame, center drive, and a light weight model. The general-purpose model of the Belgotch series that uses a 60-frame with enhanced strength and have no projection to the frame side surface of the drive part.
Belgotch Type 34 Knife Edge Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
Belgotch Type 34 Standard Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.