This type of medium weight steel roller conveyor has a Idler diameter 38.1, idler pitch is min P50. Idler width (nominal) is 100W-1000W in standard increments if 50mm, free sizes are also possible. Pressed bearing, low-cost. 60 standard frame.
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
The loading side of the conveyor is R8, and the model allows smooth transfer. Stable conveyance with less deviation is realized by adopting a meander-less belt for the roller edge. Use the conveyor for connection to a large conveyor. (The roller edge part is on one side only.)
R-3812PD Steel Roller Conveyor
This type of medium weight steel roller conveyor has a Idler diameter 38.1, idler pitch is min P50. Idler width (nominal) is 100W-1000W in standard increments if 50mm, free sizes are also possible. Pressed bearing, low-cost. 60 standard frame.
Description
Make An Offer Now!
Additional information
Steel
Straight
38.1
12.2
1.2
Steel
Medium
Related Products
Belgotch Type 34 Knife Edge Model
A conveyor for carrying small things (with a length of 20 or more) that have an R3 plate used on the loading side. (The knife edge part is on one side only.)
Belgotch Type 34 Short Width Model
Belgotch Type 34 Short Width Model has an aluminum frame, center drive, and a light weight model. A timing belt is used for the drive part as standard.
Belgotch Type 34 Roller Edge Meander less Model
The loading side of the conveyor is R8, and the model allows smooth transfer. Stable conveyance with less deviation is realized by adopting a meander-less belt for the roller edge. Use the conveyor for connection to a large conveyor. (The roller edge part is on one side only.)