The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
This belgotch has an aluminum frame, center drive, and a medium weight model. The carrier table system, which realizes stable conveyance of unstable heavy things, is adopted.
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.
MJ Component system conveyor
MJ Component system conveyor is a branching / merging unit steel roller conveyor. With a belt transmission and medium weight model.
Description
Make An Offer Now!
Additional information
Straight
300
2400
38.1, 42, 48, 57
75
1.2, 1.4
400, 500, 600, 700
12
Medium
Steel
Related Products
Belgotch Type 34 Standard Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
Belgotch Type 90 Meander less Model
This belgotch has an aluminum frame, center drive, and a medium weight model. The carrier table system, which realizes stable conveyance of unstable heavy things, is adopted.
Belgotch Type 34 Joint Model
Dimension R at both ends of the conveyor is 8 mm, and the model allows smooth transfer. A meander-less belt is adopted for the roller edge. Stable conveyance with less deviation is realized. Use the conveyor for items with a length of 40 mm or more. Entrance, exit, and one-side conveyors can also be made.