This type of light weight resin roller conveyor is ideal for conveying small items. Idler diameter is 20.2 and idler pitch is min P25. Idler width (nominal) is 100W-400W in standard increments of 50mm, free sizes are also possible. Aluminum 30 low-floor frame.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
The loading side of the conveyor is R8, and the model allows smooth transfer. Stable conveyance with less deviation is realized by adopting a meander-less belt for the roller edge. Use the conveyor for connection to a large conveyor. (The roller edge part is on one side only.)
JR-2015B Resin Roller Conveyor
This type of light weight resin roller conveyor is ideal for conveying small items. Idler diameter is 20.2 and idler pitch is min P25. Idler width (nominal) is 100W-400W in standard increments of 50mm, free sizes are also possible. Aluminum 30 low-floor frame.
Description
Make An Offer Now!
Additional information
Aluminum
Straight
20.2
6.2
1.5
Plastic
Light
Related Products
Belgotch Type 34 Meander less Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. It also uses a belt with a guide and is suitable for conditions when the belt adjustment is difficult.
Belgotch Type 34 Standard Model
The roller does not roll in the belt surface, and the conveyor is suitable for carrying items that get dirty easily. The upper part drive type should be used when there is a small amount of water or oil.
Belgotch Type 34 Roller Edge Meander less Model
The loading side of the conveyor is R8, and the model allows smooth transfer. Stable conveyance with less deviation is realized by adopting a meander-less belt for the roller edge. Use the conveyor for connection to a large conveyor. (The roller edge part is on one side only.)