Showing 1–5 of 6 results
Showing 1–5 of 6 results
-
MJD-S Upper and Lower Door
Resin bottom plate roll box pallet type. All the surfaces are covered to prevent loads from collapsing. The front door that opens and closes is convenient for taking in and out items.
-
MRD-S Upper and Lower Door
Steel bottom plate roll box pallet type. All the surfaces are covered to prevent loads from collapsing. The front door that opens and closes is convenient for taking in and out items.
-
MMB-S Panel Mesh
A roll box pallet with mesh side plates. The mesh size is 50 × 50 (mm), and the pallet is optimum for carrying and storing mixed small items. The middle rack, which is available as option, further makes the pallet convenient. It can be folded into an L shape and does not take up space when not in use.
-
MJK Resin Mesh Bottom Plate
The bottom plate is made of resin, and this greatly reduces time it takes for assembly and folding. It can be folded into an L shape and does not take up space when not in use.
-
MJR Resin Mesh Bottom Plate
Lower the bottom plate, and set the bottom plate lock bar in the pin receiving part under the right and left panels. The lock can be released just by pulling the bottom plate lock bar to the front. Steel pipes are embedded to the back surface of the bottom plate, greatly enhancing the strength. Release the bottom plate, flip it up on the back side, and set the hooks on both sides of the bottom plate between the back panel and the right and left panels.